2023+ Honda Civic Type R Wheel & Tire Fitment Guide
FL5 generation, Type R. 5x120 bolt pattern, stock 19×9.5 ET60 on 265/30R19. Compare 3 popular upgrades or try your own size.
Specs
| Bolt pattern | 5x120 |
|---|---|
| Center bore | 64.1 mm |
| Lug thread | M14x1.5 |
| Reference trim | Type R |
| Stock wheel | 19×9.5 ET60 |
| Stock tire | 265/30R19 |
| Stock overall diameter | 25.26 in |
Calculator
Starts on the stock setup. Drag the sliders or load one of the popular upgrades below.
The small mark on each slider shows the current value. Type in the box for sizes outside the slider range.
Custom vehicle measurementsOptional
Measure with your current wheels on the car and the results below show how much room the new setup leaves. The drawings use your numbers too. Leave blank anything you haven't measured.
- Park on level ground at normal ride height, wheels straight.
- Front and rear differ. Measure the axle you're changing, or enter the tighter corner.
Millimetres or centimetres are recommended: small gaps are easier to read accurately than inch marks.
Narrowest gap between the inside of the tire (or wheel, whichever sits further in) and the strut, spring perch or upper control arm. Wheels pointed straight.
Hang a plumb line or hold a straightedge vertically from the fender lip above the hub, then measure across to the outermost point of the tire or wheel. Enter a negative number if it already sticks out.
Straight up from the top of the tire to the fender lip, with the car on the ground at normal ride height.
Smallest gap between the outer edge of the brake caliper and the inside of the wheel barrel.
- Poke
- 0mm
- Wheel face stays where it is.
- Inner clearance
- 0mm
- Same room to the suspension.
- Overall diameter
- 0%
- 0 in, within ±3%.
- Speedo reads 60
- 60mph
- Your actual speed.
| Vehicle | Honda Civic Type R Type R | ||
|---|---|---|---|
| Bolt pattern | 5x120 | Hub bore | 64.1 mm |
| Current | 19×9.5 ET60, 265/30R19 | New | 19×9.5 ET60, 265/30R19 |
Popular upgrades
Each size compared with the stock 19×9.5 ET60, 265/30R19.
| Setup | Poke | Inner clearance | Diameter | Speedo reads 60 | Action |
|---|---|---|---|---|---|
| Track 18×9.518×9.5 ET45, 265/35R18 | +15 mm | +15 mm | +0.2% | 60.1 mph | |
| Flush 18×9.5 +3818×9.5 ET38, 265/35R18 | +22 mm | +22 mm | +0.2% | 60.1 mph | |
| Wide 18×9.5 27518×9.5 ET45, 275/35R18 | +15 mm | +15 mm | +1.3% | 60.8 mph |
Notes
- The 4-piston front Brembo calipers set an 18 in minimum; flat-face spoke designs clear better than stepped concave ones.
- The stock non-forged 19×9.5 ET60 wheel weighs about 26.6 lb; Honda's optional forged wheel saves about 5 lb per corner.
- The 5x120 / 64.1 mm hub and M14x1.5 lug nuts match the FK8, so FK8 wheels and fitments carry over.
Questions
What bolt pattern does a 2023+ Honda Civic Type R use?
The 2023+ Honda Civic Type R uses a 5x120 bolt pattern with a 64.1 mm center bore and M14x1.5 lug threads.
What size wheels and tires are stock on the 2023+ Honda Civic Type R Type R?
The 2023+ Honda Civic Type R Type R came with 19×9.5 ET60 wheels and 265/30R19 tires, about 25.3 inches in overall diameter.
How far does a 18×9.5 ET38 wheel stick out on a 2023+ Honda Civic Type R?
On the 2023+ Honda Civic Type R, compared with the stock 19×9.5 ET60, a 18×9.5 ET38 sits 22 mm further out at the outer lip and 22 mm further from the suspension at the inner barrel.
Which 2023+ Honda Civic Type R wheel and tire upgrade keeps the speedometer most accurate?
Of the 2023+ Honda Civic Type R upgrades listed here, 18×9.5 ET45 · 265/35R18 is closest to the stock 265/30R19, changing overall diameter by +0.2%. At an indicated 60 mph you would actually be doing 60.1 mph.
Do aftermarket wheels need hub-centric rings on a 2023+ Honda Civic Type R?
The 2023+ Honda Civic Type R's hub bore is 64.1 mm. Wheels machined to exactly 64.1 mm center on the hub directly; wheels with a larger bore need 64.1 mm hub-centric rings to avoid vibration.
Also on 5x120
These share the bolt pattern. Check offset, hub bore and brake clearance before swapping wheels.
| Vehicle | Generation | Bolt pattern | Hub bore |
|---|---|---|---|
| 2017–2021 Honda Civic Type R | FK8 | 5x120 | 64.1 mm |
| 2024+ Acura Integra | DE5 | 5x120 | 64.1 mm |
| 2022+ Cadillac CT5-V Blackwing | 1st gen | 5x120 | 66.9 mm |
| 2010–2015 Chevrolet Camaro | 5th gen | 5x120 | 66.9 mm |
| 2016–2024 Chevrolet Camaro | 6th gen | 5x120 | 66.9 mm |
| 2017–2024 Chevrolet Camaro | 6th gen | 5x120 | 66.9 mm |