2017–2021 Honda Civic Type R Wheel & Tire Fitment Guide
FK8 generation, Type R. 5x120 bolt pattern, stock 20×8.5 ET60 on 245/30R20. Compare 2 popular upgrades or try your own size.
Specs
| Bolt pattern | 5x120 |
|---|---|
| Center bore | 64.1 mm |
| Lug thread | M14x1.5 |
| Reference trim | Type R |
| Stock wheel | 20×8.5 ET60 |
| Stock tire | 245/30R20 |
| Stock overall diameter | 25.79 in |
Calculator
Starts on the stock setup. Drag the sliders or load one of the popular upgrades below.
The small mark on each slider shows the current value. Type in the box for sizes outside the slider range.
Custom vehicle measurementsOptional
Measure with your current wheels on the car and the results below show how much room the new setup leaves. The drawings use your numbers too. Leave blank anything you haven't measured.
- Park on level ground at normal ride height, wheels straight.
- Front and rear differ. Measure the axle you're changing, or enter the tighter corner.
Millimetres or centimetres are recommended: small gaps are easier to read accurately than inch marks.
Narrowest gap between the inside of the tire (or wheel, whichever sits further in) and the strut, spring perch or upper control arm. Wheels pointed straight.
Hang a plumb line or hold a straightedge vertically from the fender lip above the hub, then measure across to the outermost point of the tire or wheel. Enter a negative number if it already sticks out.
Straight up from the top of the tire to the fender lip, with the car on the ground at normal ride height.
Smallest gap between the outer edge of the brake caliper and the inside of the wheel barrel.
- Poke
- 0mm
- Wheel face stays where it is.
- Inner clearance
- 0mm
- Same room to the suspension.
- Overall diameter
- 0%
- 0 in, within ±3%.
- Speedo reads 60
- 60mph
- Your actual speed.
| Vehicle | Honda Civic Type R Type R | ||
|---|---|---|---|
| Bolt pattern | 5x120 | Hub bore | 64.1 mm |
| Current | 20×8.5 ET60, 245/30R20 | New | 20×8.5 ET60, 245/30R20 |
Popular upgrades
Each size compared with the stock 20×8.5 ET60, 245/30R20.
| Setup | Poke | Inner clearance | Diameter | Speedo reads 60 | Action |
|---|---|---|---|---|---|
| Track 18×9.518×9.5 ET45, 265/35R18 | +27.7 mm | +2.3 mm | −1.9% | 58.9 mph | |
| Wide 18×1018×10 ET40, 275/35R18 | +39.1 mm | +0.9 mm | −0.8% | 59.5 mph |
Notes
- The front Brembo calipers rule out 17 in wheels, and some 18 in designs need checking for spoke clearance.
- 18×9.5 ET45 with 265/35R18 is the common downsize and bolts on without fender work.
- The FK8 uses 5x120 and M14x1.5, unlike the 5x114.3 / M12 non-Type R Civic, and shares its wheel fitment with the FL5.
Questions
What bolt pattern does a 2017–2021 Honda Civic Type R use?
The 2017–2021 Honda Civic Type R uses a 5x120 bolt pattern with a 64.1 mm center bore and M14x1.5 lug threads.
What size wheels and tires are stock on the 2017–2021 Honda Civic Type R Type R?
The 2017–2021 Honda Civic Type R Type R came with 20×8.5 ET60 wheels and 245/30R20 tires, about 25.8 inches in overall diameter.
How far does a 18×10 ET40 wheel stick out on a 2017–2021 Honda Civic Type R?
On the 2017–2021 Honda Civic Type R, compared with the stock 20×8.5 ET60, a 18×10 ET40 sits 39.1 mm further out at the outer lip and 0.9 mm further from the suspension at the inner barrel.
Which 2017–2021 Honda Civic Type R wheel and tire upgrade keeps the speedometer most accurate?
Of the 2017–2021 Honda Civic Type R upgrades listed here, 18×10 ET40 · 275/35R18 is closest to the stock 245/30R20, changing overall diameter by −0.8%. At an indicated 60 mph you would actually be doing 59.5 mph.
Do aftermarket wheels need hub-centric rings on a 2017–2021 Honda Civic Type R?
The 2017–2021 Honda Civic Type R's hub bore is 64.1 mm. Wheels machined to exactly 64.1 mm center on the hub directly; wheels with a larger bore need 64.1 mm hub-centric rings to avoid vibration.
Also on 5x120
These share the bolt pattern. Check offset, hub bore and brake clearance before swapping wheels.
| Vehicle | Generation | Bolt pattern | Hub bore |
|---|---|---|---|
| 2023+ Honda Civic Type R | FL5 | 5x120 | 64.1 mm |
| 2024+ Acura Integra | DE5 | 5x120 | 64.1 mm |
| 2022+ Cadillac CT5-V Blackwing | 1st gen | 5x120 | 66.9 mm |
| 2010–2015 Chevrolet Camaro | 5th gen | 5x120 | 66.9 mm |
| 2016–2024 Chevrolet Camaro | 6th gen | 5x120 | 66.9 mm |
| 2017–2024 Chevrolet Camaro | 6th gen | 5x120 | 66.9 mm |