2020+ BMW 3 Series Wheel & Tire Fitment Guide
G20 generation, M340i. 5x112 bolt pattern, stock 18×7.5 ET25 on 225/45R18. Compare 2 popular upgrades or try your own size.
Specs
| Bolt pattern | 5x112 |
|---|---|
| Center bore | 66.6 mm |
| Lug thread | M14x1.25 |
| Reference trim | M340i |
| Stock wheel | 18×7.5 ET25 |
| Stock tire | 225/45R18 |
| Stock overall diameter | 25.97 in |
Calculator
Starts on the stock setup. Drag the sliders or load one of the popular upgrades below.
The small mark on each slider shows the current value. Type in the box for sizes outside the slider range.
Custom vehicle measurementsOptional
Measure with your current wheels on the car and the results below show how much room the new setup leaves. The drawings use your numbers too. Leave blank anything you haven't measured.
- Park on level ground at normal ride height, wheels straight.
- Front and rear differ. Measure the axle you're changing, or enter the tighter corner.
Millimetres or centimetres are recommended: small gaps are easier to read accurately than inch marks.
Narrowest gap between the inside of the tire (or wheel, whichever sits further in) and the strut, spring perch or upper control arm. Wheels pointed straight.
Hang a plumb line or hold a straightedge vertically from the fender lip above the hub, then measure across to the outermost point of the tire or wheel. Enter a negative number if it already sticks out.
Straight up from the top of the tire to the fender lip, with the car on the ground at normal ride height.
Smallest gap between the outer edge of the brake caliper and the inside of the wheel barrel.
- Poke
- 0mm
- Wheel face stays where it is.
- Inner clearance
- 0mm
- Same room to the suspension.
- Overall diameter
- 0%
- 0 in, within ±3%.
- Speedo reads 60
- 60mph
- Your actual speed.
| Vehicle | BMW 3 Series M340i | ||
|---|---|---|---|
| Bolt pattern | 5x112 | Hub bore | 66.6 mm |
| Current | 18×7.5 ET25, 225/45R18 | New | 18×7.5 ET25, 225/45R18 |
Popular upgrades
Each size compared with the stock 18×7.5 ET25, 225/45R18.
| Setup | Poke | Inner clearance | Diameter | Speedo reads 60 | Action |
|---|---|---|---|---|---|
| OEM+ 19×8.519×8.5 ET22, 245/35R19 | +15.7 mm | −9.7 mm | −0.8% | 59.5 mph | |
| Flush 19×9.519×9.5 ET25, 255/35R19 | +25.4 mm | −25.4 mm | +0.2% | 60.1 mph |
Notes
- Rear stock (Style 790M): 18×8.5 ET40 with 255/40R18.
- Optional 19-inch Style 791M is 19×8 ET27 front with 225/40R19 and 255/35R19 rear.
- The G20 moved to 5x112 with a 66.6 mm hub and M14x1.25 lug bolts, so F30-era 5x120 wheels won't bolt on.
- 19×9.5 ET23–25 fronts only just clear the M Sport calipers; on xDrive cars, keep front and rear rolling diameters within about 1%.
Questions
What bolt pattern does a 2020+ BMW 3 Series use?
The 2020+ BMW 3 Series uses a 5x112 bolt pattern with a 66.6 mm center bore and M14x1.25 lug threads.
What size wheels and tires are stock on the 2020+ BMW 3 Series M340i?
The 2020+ BMW 3 Series M340i came with 18×7.5 ET25 wheels and 225/45R18 tires, about 26 inches in overall diameter.
How far does a 19×9.5 ET25 wheel stick out on a 2020+ BMW 3 Series?
On the 2020+ BMW 3 Series, compared with the stock 18×7.5 ET25, a 19×9.5 ET25 sits 25.4 mm further out at the outer lip and 25.4 mm closer to the suspension at the inner barrel.
Which 2020+ BMW 3 Series wheel and tire upgrade keeps the speedometer most accurate?
Of the 2020+ BMW 3 Series upgrades listed here, 19×9.5 ET25 · 255/35R19 is closest to the stock 225/45R18, changing overall diameter by +0.2%. At an indicated 60 mph you would actually be doing 60.1 mph.
Do aftermarket wheels need hub-centric rings on a 2020+ BMW 3 Series?
The 2020+ BMW 3 Series's hub bore is 66.6 mm. Wheels machined to exactly 66.6 mm center on the hub directly; wheels with a larger bore need 66.6 mm hub-centric rings to avoid vibration.
Also on 5x112
These share the bolt pattern. Check offset, hub bore and brake clearance before swapping wheels.
| Vehicle | Generation | Bolt pattern | Hub bore |
|---|---|---|---|
| 2023+ BMW M2 | G87 | 5x112 | 66.6 mm |
| 2021+ BMW M3 | G80 | 5x112 | 66.6 mm |
| 2020+ Toyota GR Supra | A90/J29 | 5x112 | 66.6 mm |
| 2010–2016 Audi S4 | B8/B8.5 | 5x112 | 66.6 mm |
| 2000–2002 Audi S4 | B5 | 5x112 | 57.1 mm |
| 2018–2025 Audi S4 | B9 | 5x112 | 66.5 mm |