2016–2021 BMW M2 Wheel & Tire Fitment Guide
F87 generation, Base / Competition. 5x120 bolt pattern, stock 19×9 ET29 on 245/35R19. Compare 2 popular upgrades or try your own size.
Specs
| Bolt pattern | 5x120 |
|---|---|
| Center bore | 72.6 mm |
| Lug thread | M14x1.25 |
| Reference trim | Base / Competition |
| Stock wheel | 19×9 ET29 |
| Stock tire | 245/35R19 |
| Stock overall diameter | 25.75 in |
Calculator
Starts on the stock setup. Drag the sliders or load one of the popular upgrades below.
The small mark on each slider shows the current value. Type in the box for sizes outside the slider range.
Custom vehicle measurementsOptional
Measure with your current wheels on the car and the results below show how much room the new setup leaves. The drawings use your numbers too. Leave blank anything you haven't measured.
- Park on level ground at normal ride height, wheels straight.
- Front and rear differ. Measure the axle you're changing, or enter the tighter corner.
Millimetres or centimetres are recommended: small gaps are easier to read accurately than inch marks.
Narrowest gap between the inside of the tire (or wheel, whichever sits further in) and the strut, spring perch or upper control arm. Wheels pointed straight.
Hang a plumb line or hold a straightedge vertically from the fender lip above the hub, then measure across to the outermost point of the tire or wheel. Enter a negative number if it already sticks out.
Straight up from the top of the tire to the fender lip, with the car on the ground at normal ride height.
Smallest gap between the outer edge of the brake caliper and the inside of the wheel barrel.
- Poke
- 0mm
- Wheel face stays where it is.
- Inner clearance
- 0mm
- Same room to the suspension.
- Overall diameter
- 0%
- 0 in, within ±3%.
- Speedo reads 60
- 60mph
- Your actual speed.
| Vehicle | BMW M2 Base / Competition | ||
|---|---|---|---|
| Bolt pattern | 5x120 | Hub bore | 72.6 mm |
| Current | 19×9 ET29, 245/35R19 | New | 19×9 ET29, 245/35R19 |
Popular upgrades
Each size compared with the stock 19×9 ET29, 245/35R19.
| Setup | Poke | Inner clearance | Diameter | Speedo reads 60 | Action |
|---|---|---|---|---|---|
| Square 18×9.518×9.5 ET35, 265/35R18 | +0.3 mm | −12.3 mm | −1.7% | 59 mph | |
| Track square 18×1018×10 ET25, 265/35R18 | +16.7 mm | −8.7 mm | −1.7% | 59 mph |
Notes
- Rear stock: 19×10 ET40 with 265/35ZR19. The base M2 (Style 437M) and M2 Competition (Style 788M) share the same sizes and offsets.
- The M2 Competition's 400 mm, 6-piston front brakes rule out 18-inch front wheels. The base M2's brakes clear 18s, and BMW lists 18×8.5 ET27 winter wheels for it.
- Uses M14x1.25 lug bolts with a 60° taper seat.
- The square 18×9.5 ET35 is usually run with about 5 mm spacers. 18×10 ET25 builds use about -3° front and -2° rear camber.
Questions
What bolt pattern does a 2016–2021 BMW M2 use?
The 2016–2021 BMW M2 uses a 5x120 bolt pattern with a 72.6 mm center bore and M14x1.25 lug threads.
What size wheels and tires are stock on the 2016–2021 BMW M2 Base / Competition?
The 2016–2021 BMW M2 Base / Competition came with 19×9 ET29 wheels and 245/35R19 tires, about 25.8 inches in overall diameter.
How far does a 18×10 ET25 wheel stick out on a 2016–2021 BMW M2?
On the 2016–2021 BMW M2, compared with the stock 19×9 ET29, a 18×10 ET25 sits 16.7 mm further out at the outer lip and 8.7 mm closer to the suspension at the inner barrel.
Which 2016–2021 BMW M2 wheel and tire upgrade keeps the speedometer most accurate?
Of the 2016–2021 BMW M2 upgrades listed here, 18×9.5 ET35 · 265/35R18 is closest to the stock 245/35R19, changing overall diameter by −1.7%. At an indicated 60 mph you would actually be doing 59 mph.
Do aftermarket wheels need hub-centric rings on a 2016–2021 BMW M2?
The 2016–2021 BMW M2's hub bore is 72.6 mm. Wheels machined to exactly 72.6 mm center on the hub directly; wheels with a larger bore need 72.6 mm hub-centric rings to avoid vibration.
Also on 5x120
These share the bolt pattern. Check offset, hub bore and brake clearance before swapping wheels.
| Vehicle | Generation | Bolt pattern | Hub bore |
|---|---|---|---|
| 2015–2018 BMW M3 | F80 | 5x120 | 72.6 mm |
| 2013–2016 BMW M5 | F10 | 5x120 | 72.6 mm |
| 1992–1999 BMW 3 Series | E36 | 5x120 | 72.6 mm |
| 1999–2006 BMW 3 Series | E46 | 5x120 | 72.6 mm |
| 2001–2006 BMW M3 | E46 | 5x120 | 72.6 mm |
| 2008–2013 BMW M3 | E90/E92 | 5x120 | 72.6 mm |