2016+ Mazda MX-5 Miata Wheel & Tire Fitment Guide
ND generation, Club. 4x100 bolt pattern, stock 17×7 ET45 on 205/45R17. Compare 3 popular upgrades or try your own size.
Specs
| Bolt pattern | 4x100 |
|---|---|
| Center bore | 54.1 mm |
| Lug thread | M12x1.5 |
| Reference trim | Club |
| Stock wheel | 17×7 ET45 |
| Stock tire | 205/45R17 |
| Stock overall diameter | 24.26 in |
Calculator
Starts on the stock setup. Drag the sliders or load one of the popular upgrades below.
The small mark on each slider shows the current value. Type in the box for sizes outside the slider range.
Custom vehicle measurementsOptional
Measure with your current wheels on the car and the results below show how much room the new setup leaves. The drawings use your numbers too. Leave blank anything you haven't measured.
- Park on level ground at normal ride height, wheels straight.
- Front and rear differ. Measure the axle you're changing, or enter the tighter corner.
Millimetres or centimetres are recommended: small gaps are easier to read accurately than inch marks.
Narrowest gap between the inside of the tire (or wheel, whichever sits further in) and the strut, spring perch or upper control arm. Wheels pointed straight.
Hang a plumb line or hold a straightedge vertically from the fender lip above the hub, then measure across to the outermost point of the tire or wheel. Enter a negative number if it already sticks out.
Straight up from the top of the tire to the fender lip, with the car on the ground at normal ride height.
Smallest gap between the outer edge of the brake caliper and the inside of the wheel barrel.
- Poke
- 0mm
- Wheel face stays where it is.
- Inner clearance
- 0mm
- Same room to the suspension.
- Overall diameter
- 0%
- 0 in, within ±3%.
- Speedo reads 60
- 60mph
- Your actual speed.
| Vehicle | Mazda MX-5 Miata Club | ||
|---|---|---|---|
| Bolt pattern | 4x100 | Hub bore | 54.1 mm |
| Current | 17×7 ET45, 205/45R17 | New | 17×7 ET45, 205/45R17 |
Popular upgrades
Each size compared with the stock 17×7 ET45, 205/45R17.
| Setup | Poke | Inner clearance | Diameter | Speedo reads 60 | Action |
|---|---|---|---|---|---|
| Mild 17×817×8 ET40, 215/45R17 | +17.7 mm | −7.7 mm | +1.5% | 60.9 mph | |
| Grip 16×816×8 ET38, 225/50R16 | +19.7 mm | −5.7 mm | +2.5% | 61.5 mph | |
| Track 17×917×9 ET45, 225/45R17 | +25.4 mm | −25.4 mm | +2.9% | 61.8 mph |
Notes
- Sport trim uses 16×6.5 ET45 with 195/50R16; Club and Grand Touring use 17×7 ET45 with 205/45R17.
- North American 2.0L cars have larger brakes than the 1.5L. 15-in wheels generally need the 1.5L brakes swapped in, and some 17s need to be checked against the optional Brembo front calipers.
- 17×9 ET45 takes 225/45R17 or 235/40R17 under stock fenders; 245/40R17 may need a fender roll and can polish the front control arm at full lock.
- With wider wheels, relocating the rear brake line is recommended to avoid contact.
Questions
What bolt pattern does a 2016+ Mazda MX-5 Miata use?
The 2016+ Mazda MX-5 Miata uses a 4x100 bolt pattern with a 54.1 mm center bore and M12x1.5 lug threads.
What size wheels and tires are stock on the 2016+ Mazda MX-5 Miata Club?
The 2016+ Mazda MX-5 Miata Club came with 17×7 ET45 wheels and 205/45R17 tires, about 24.3 inches in overall diameter.
How far does a 17×9 ET45 wheel stick out on a 2016+ Mazda MX-5 Miata?
On the 2016+ Mazda MX-5 Miata, compared with the stock 17×7 ET45, a 17×9 ET45 sits 25.4 mm further out at the outer lip and 25.4 mm closer to the suspension at the inner barrel.
Which 2016+ Mazda MX-5 Miata wheel and tire upgrade keeps the speedometer most accurate?
Of the 2016+ Mazda MX-5 Miata upgrades listed here, 17×8 ET40 · 215/45R17 is closest to the stock 205/45R17, changing overall diameter by +1.5%. At an indicated 60 mph you would actually be doing 60.9 mph.
Do aftermarket wheels need hub-centric rings on a 2016+ Mazda MX-5 Miata?
The 2016+ Mazda MX-5 Miata's hub bore is 54.1 mm. Wheels machined to exactly 54.1 mm center on the hub directly; wheels with a larger bore need 54.1 mm hub-centric rings to avoid vibration.
Also on 4x100
These share the bolt pattern. Check offset, hub bore and brake clearance before swapping wheels.
| Vehicle | Generation | Bolt pattern | Hub bore |
|---|---|---|---|
| 1990–1997 Mazda MX-5 Miata | NA | 4x100 | 54.1 mm |